Showing 2737–2748 of 3078 results
-
Trend C005 x 14 TCT Two Flute 6.0mm
$11.92Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D – Diameter – 15/64in 6.0mmC – Cutting Length – 5/8in 16mmT.C.T. 2 Flutes.
-
Trend C040 x 14 TCT Self Guided Rebater
$31.84This cutter is self guiding and can be used to produce rebates, lapjoints, tongues and rebated corners. Alternative bearings can be purchased to vary the rebate. Diameter . 35.0mm.C = 12.7mm.E = 11.1mm.B = 12.7mm. T.C.T.1/4IN Shank.
-
Trend C076 x 14 TCT Bearing Guided Ovolo Round Over 6.3mm Radius
$35.58Trend CO76X1 Rounding over, self-guiding cutters for rounding over edges do not require a side fence with a 6.3 mm radius x 12.7 mm cut. Supplied with two bearings – use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
-
Trend C145 x 14 TCT Slotting Cutter 6.3mm
$28.89This two wing slotting cutter is ideal for grooving and rebating operations. A 1/2in diameter bearing is supplied with every cutter. Depth of cut can be changed by purchasing alternative bearing sizes. T.C.T.Shank = 1/4in.C = 6.3 mm (Slots) Depth with standard cutter = 3/8in.
-
Trend COMBI1002 Postform Jig
$315.93The COMBI1002 is made from a hard-wearing solid laminate and is a 16mm thick jig with a single male and female template. Features Include: – Facility to Join Boards (from 450mm to 1000mm wide). – 3 Alloy Location Bushes & Width-Setting Stop. – Colour Coded Pin Location (for quick and easy use). – Four Bolt Recess Slots (for Connection Bolts). Preset Cuts: – Left Hand & Right Hand Corners. – 410mm Radius Peninsular Joints. – 45 Degree End-Cut with Slight Radius. – 22.5 Degree Trade Corner for Hobs. – 75mm Radius Corner. – 35mm Circular Hinge Cuts (Cable Tidy Inserts). – 3 Degree Out of Square Cuts.
-
Trend GAUGE1 Depth Gauge
$12.52A metal rule depth gauge to set the height of router cutters and saw blades accurately. Horizontal & vertical measuring. For hand routers, router tables and saw benches. 60 mm wide aperture & accurate to 0.5 mm. 80 mm measurement range. U section plastic injection moulding with unique cam lever lock. Steel rule dual metric & imperial scale. Self standing for setting cutter depth on router tables and low profile for backfence adjustment. Patent No. GB2386085. US Appl No. 10/784,780.
-
Trend Grabse1set Damaged Screw Remover Set
$10.11Double ended screw removers for use with a reversible drill to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. This set can be used on Pozi, Phillips, Slotted, Hexagon, Torx, Tri-Wing, Frearson and most Tamper Resistant Screws.
-
Trend KWJ700 Kitchen Worktop Jig 700mm
$100.46The KWJ/700 is made from a hard-wearing solid laminate and is 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. Features Include: – Engraved Markings (for identification of pin holes). – Engraved Lines (for worktop cross-cut). – Cuts Up To 40mm Worktops. – 10mm Diameter Plastic Pins (provides three-point contact for setting-up). Preset Cuts: – Left Hand & Right Hand Corners. – 400mm Radius Peninsular Joints. – 45 Degree End-Cut with Slight Radius. – 45 Degree Trade Corner for Hobs. – 100mm Radius Corner – 40mm Radius Corner – 35mm Kitchen Door Hole – 3/4in BSP Hole for Mixer Taps Fixed Lengths: – 250mm – 300mm – 400mm – 500mm – 550mm – 600mm – 616mm – 635mm – 650mm – 700mm
