HyperX 8GB 2400Mhz DDR4 Non-ECC 288 Pin DIMM CL15 PC Memory Module – Black

Description

Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Key Features – Power Supply: VDD = 1.2V Typical – VDDQ = 1.2V Typical – VPP – 2.5V Typical – VDDSPD = 2.2V to 3.6V – Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals – Low-power auto self refresh (LPASR) – Data bus inversion (DBI) for data bus – On-die VREFDQ generation and calibration – Single-rank – On-board I2 serial presence-detect (SPD) EEPROM – 16 internal banks; 4 groups of 4 banks each – Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) – Selectable BC4 or BL8 on-the-fly (OTF) – Fly-by topology – Terminated control command and address bus – Height 1.340″ (34.04mm), w/o heatsink Specifications CL(IDD) 15 cycles Row Cycle Time (tRCmin) 46.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin) 350ns(min.) Row Active Time (tRASmin) 29.125ns(min.) Maximum Operating Power TBD W* UL Rating 94 V – 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC Speed: 2400 MHz (PC4-19200) Latency Timings: CL15 (15-15-15) Type: DRAM Technology: DDR4 SDRAM Form Factor: DIMM 288-pin Module Height (inch): 1.34 Data Integrity Check: Non-ECC Module Configuration: 1024 x 64 Chips Organization: 1024 x 8 Voltage: 1.2 V Lead Plating: Gold Box Contents 1 x HyperX 8GB 2400MHz DDR4 CL15 Black Memory